CFD modeling of thermal contact resistance between solid contacting surfaces

Heat transfer has considerable applications in different industries such as designing of heat exchanger, nuclear reactor cooling, control system for spacecraft, and designing of microelectronics cooling. As the surfaces of two metals contact each other, this issue becomes so crucial. Thermal contact resistance (TCR) is one of the key physical parameters in heat transfer of mentioned surfaces. Measuring the experimental value of TCR in laboratory is highly expensive and difficult. As an alternative, numerical modeling methods could be engaged. In this study, inverse problem method solution is utilized as a proper method for estimation of TCR value. In this order, three different configurations (flat-flat, flat-cylinder, and cylinder-cylinder) were utilized in two steady and unsteady state conditions to predict the value of TCR. A comparison between the measured values and obtained values from the simulation show the errors for flat-flat, flat-cylinder, and cylinder-cylinder configuration after 10 min from starting the experiment are 4.6074%, 0.1662%, and 0.5622%, respectively. And in steady-state condition, the corresponding errors are 6.06e-3%, 1.506%, and 0.846%, respectively. In conclusion, the final results establish the fact that the inverse problem method solution can predict TCR values between contacting surfaces.     

复频电导技术在隧洞超前探水中的应用

围岩富水带是隧道超前预报最关注的问题，目前，多使用电磁方法来预报围岩的含水性，但受到场地条件限制，面临掌子面条件、金属机具干扰、三维波场定位等诸多困难，特别是掌子面前方100 m范围内围岩的含水性预报，在国内外都是一个新的高难课题。在研究了岩体电导率与电容率复频特性的基础上，结合巴基斯坦NJ-TBM引水隧洞工程，开发了复频电导探水(CFC)技术。该技术基于电磁波反射与相干原理，选用100 kHz～10 MHz频率范围，采用电偶极子发射与阵列接收方式和偏移成像技术，突破了隧道内场地条件的限制。依据1/4相干波长确定含水体的位置，相干能量确定含水量的大小。在巴基斯坦NJ-TBM隧洞超前探水的应用，证明了该方法的可行性与有效性。      

Utilizing sensor data to model students’ creativity in a digital environment

While creativity is essential for developing students’ broad expertise in Science, Technology, Engineering, and Math (STEM) fields, many students struggle with various aspects of being creative. Digital technologies have the unique opportunity to support the creative process by (1) recognizing elements of students’ creativity, such as when creativity is lacking (modeling step), and (2) providing tailored scaffolding based on that information (intervention step). However, to date little work exists on either of these aspects. Here, we focus on the modeling step. Specifically, we explore the utility of various sensing devices, including an eye tracker, a skin conductance bracelet, and an EEG sensor, for modeling creativity during an educational activity, namely geometry proof generation. We found reliable differences in sensor features characterizing low vs. high creativity students. We then applied machine learning to build classifiers that achieved good accuracy in distinguishing these two student groups, providing evidence that sensor features are valuable for modeling creativity.     

Constructal design of flat tubes cooled by natural convection

A set of vertical flat tubes cooled by natural convection and placed in a finite size space is designed based on the constructal law. The constraint in this design is the size of the space where the tubes are placed. The freedom inside the space is the distance between the tubes. When the constructal law is applied, the optimal distance between the tubes is determined. Rayleigh numbers are taken as (Ra = 10³, 10⁴, and 10⁵). The dimensionless tube diameter (tube diameter/tube height) is changed from (D* = 0.2) to (D* = 1) (circular tube). All the tubes are heated to the same wall temperature. The air used to cool the tubes has a Prandtl number (Pr = 0.72). The equations of conservation of mass, momentum, and energy for steady, two-dimensional, and incompressible flow are solved by the finite volume method. The result showed that the best or optimal distance at a given Rayleigh number remains constant for all tube diameters. The result also showed that the number of the small diameter tubes must be more than the number of the large-diameter tubes for the same Rayleigh number and the same size of the space to make the heat flow from the tubes to the coolant easier.     

瞬变电磁测深在工程勘察中的应用

本文介绍了瞬变电磁测深的基本原理、方法技术及其在黄河西霞院坝址勘察中的应用效果.     

水化时间对矿物掺合料混凝土抗氯离子渗透性的影响

用电导率法研究了分别掺加粉煤灰、磨细矿渣、硅粉等矿物掺合料混凝土的氯离子渗透性与水化时间的关系,发现在180d养护时间内混凝土的电导与时间经拟合为幂函数关系,且矿物掺合料混凝土电导对养护时间更敏感;混凝土中掺加矿物掺合料可以显著降低混凝土的导电能力;水胶比对混凝土渗透性有较大影响,水胶比越大,混凝土抵抗氯离子渗透的能力越低。     

基于改变比例因子的变步长最大功率跟踪算法

通过仿真模拟分析光伏电池特性,针对传统的变步长电导增量(INC)法存在无法同时满足跟踪速率和减少振荡的问题,提出了一种基于改变步长比例因子的变步长最大功率算法,实时判断工作点的状态来选择不同的步长比例因子,从而解决MPPT控制过程中动态响应和稳态波动的这一矛盾关系。仿真结果表明:改进的算法和传统的变步长INC相比,跟踪过程更快速,跟踪结果更精确,系统输出功率在最大功率点处的振荡得以有效降低,动态性能和稳态性能都更优异。     

Caveolin-1 Limits the Contribution of BKCa Channel to MCF-7 Breast Cancer Cell Proliferation and Invasion

Increasing evidence suggests that caveolin-1 and large conductance Ca²⁺-activated potassium (BKCa) channels are implicated in the carcinogenesis processes, including cell proliferation and invasion. These two proteins have been proven to interact with each other in vascular endothelial and smooth muscle cells and modulate vascular contractility. In this study, we investigated the probable interaction between caveolin-1 and BKCa in MCF-7 breast cancer cells. We identified that caveolin-1 and BKCa were co-localized and could be reciprocally co-immunoprecipitated in human breast cancer MCF-7 cells. siRNA mediated caveolin-1 knockdown resulted in activation and increased surface expression of BKCa channel, and subsequently promoted the proliferation and invasiveness of breast cancer cells. These effects were attenuated in the presence of BKCa-siRNA. Conversely, up-regulated caveolin-1 suppressed function and surface expression of BKCa channel and exerted negative effects on breast cancer cell proliferation and invasion. Similarly, these opposing effects were abrogated by BKCa up-regulation. Collectively, our findings suggest that BKCa is a critical target for suppression by caveolin-1 in suppressing proliferation and invasion of breast cancer cells. The functional complex of caveolin-1 and BKCa in the membrane microdomain may be served as a potential therapeutic target in breast cancer.